What is a RTP? Forging furnace specifications, models, and parameters

RTPIt is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced RTP developed by our company in combination with the actual situation of the industry。

1、Brief introduction of RTP

RTPIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in building materials, war industry, machinery, automobile, material and other industries，is a common RTP。

RTP

2、RTP application

RTPs have the following purposes.

1. Improve production efficiency

The RTP has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, RTPs can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the RTP can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of RTPs can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The RTP uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

RTP

3、RTP video live broadcast

On-site aerial photography of RTP。

RTP

As you can see from the live video.，One-combustion energy saving it is widely used in shipping, machinery, light industry, building materials and aerospace。

4、RTP performance advantage

RTPs have the following advantages.

1. Extend the service life of equipment

The RTP adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The RTP adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The RTP can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the RTP can significantly reduce energy consumption, thus reducing operating costs.

5. Improve product quality

Because the RTP can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

RTP

5、Advantages of RTP principle

RTPat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，It is a forging heating device using gas as fuel.，can be customized according to user's needs.。

RTP

6、RTP quotation

The RTP price is introduced as follows:

1. Manufacturer's strength

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

2. Less intermediate links

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

3. Different regions

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. manufacturing cost

Cost is a direct and fundamental factor that affects the price of RTP. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in RTP price, low in cost and low in price.

5. raw material

The quality of material selection is one of the main factors that directly affect the RTP. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

RTP

RTPthe advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.。