Introduction to Double chamber annealing furnace, heating furnace specifications, model parameters

Double chamber annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the structure of ventilation system, recovery of waste heat, convection chamber, furnace chamber and ventilation system，This Double chamber annealing furnaceThe overall structural design is simple and novel.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。The following is to introduce the Double chamber annealing furnace:

1、Brief introduction of Double chamber annealing furnace

Double chamber annealing furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as Forging heating, temper, normalizing, Casting heating and quench，is a common Double chamber annealing furnace，It is mostly used in Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency and so on，was developed and designed by One-combustion energy saving。

Double chamber annealing furnace

2、Double chamber annealing furnace use

The purpose of Double chamber annealing furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Double chamber annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Double chamber annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Double chamber annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Energy conservation and environmental protection

The Double chamber annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Double chamber annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double chamber annealing furnace

3、Double chamber annealing furnace performance advantage

The advantages of Double chamber annealing furnace are as follows:

1. Efficient combustion

The Double chamber annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Double chamber annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Wide application range

The Double chamber annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The Double chamber annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Double chamber annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Double chamber annealing furnace

4、Double chamber annealing furnace introduction video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Double chamber annealing furnace production process and production site, and gain favorable comments and recognition from customers.。

Double chamber annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as anneal, hardening and tempering, heat treatment, Forging heating and temper。

5、Double chamber annealing furnace principle

Double chamber annealing furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Simple structure and advanced technology.，the main structure includes ventilation system, combustor, ventilation system, convection chamber and Radiation chamber，It is an efficient, energy-saving and environment-friendly metal heating device.，be loved by our customers.。

Double chamber annealing furnace

6、company introduction

One-combustion energy saving is a professional and large-scale Double chamber annealing furnace manufacturer, which has many years of production and operation, complete production facilities, skilled staff and high production capacity and product quality. It is a Double chamber annealing furnace manufacturer trusted by consumers at present.。

One-combustion energy saving

Double chamber annealing furnaceit is mainly composed of ventilation system, Radiation chamber, recovery of waste heat, combustor and recovery of waste heat，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.。