What is a Segmented annealing heat treatment furnace? Introduction to the Working Principle of forging furnace

Segmented annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of hardening and tempering, temper, anneal, Forging heating and quench，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of ventilation system, ventilation system, convection chamber, furnace chamber and ventilation system，was developed and designed by One-combustion energy saving。

1、Brief introduction of Segmented annealing heat treatment furnace

Segmented annealing heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main features are energy-efficient, Stable and reliable, energy saving and environmental protection, Easy to maintain and Easy to control，the product looks beautiful.。

Segmented annealing heat treatment furnace

2、Segmented annealing heat treatment furnace function

Segmented annealing heat treatment furnaceit has the functions of heat treatment, quench, normalizing, anneal and temper，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，super quality and competitive price。

Segmented annealing heat treatment furnace

3、Segmented annealing heat treatment furnace characteristics

The Segmented annealing heat treatment furnace features are as follows:

1. Efficient heating

The Segmented annealing heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Efficient heating

The Segmented annealing heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to control

The combustion system and ventilation system of the Segmented annealing heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Segmented annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Segmented annealing heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Segmented annealing heat treatment furnace

4、Segmented annealing heat treatment furnace structure

The Segmented annealing heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Segmented annealing heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Segmented annealing heat treatment furnace

5、How much is the Segmented annealing heat treatment furnace?

The Segmented annealing heat treatment furnace price is introduced as follows:

1. Manufacturer scale

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Segmented annealing heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Segmented annealing heat treatment furnace price can meet the purchasing needs of customers.

3. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Segmented annealing heat treatment furnace.

4. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

5. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Segmented annealing heat treatment furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Segmented annealing heat treatment furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

Segmented annealing heat treatment furnace

6、Company preferential activities

Segmented annealing heat treatment furnace is a new type of forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for petroleum and other industries. Now consult One-combustion energy savingSegmented annealing heat treatment furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Segmented annealing heat treatment furnaceIt has a wide range of uses, and is often used inMetal heat treatment,Metal melting and casting,Improve production efficiency,Metal heat treatment,Metal forging heating and so on，multifunctional, with functions such as hardening and tempering, Forging heating, Casting heating, heat treatment and Forging heating，Simple structure and reliable operation.，generally, it is composed of convection chamber, furnace chamber, ventilation system, Radiation chamber, recovery of waste heat and other major components。