Introduction to High temperature reheating furnace, heating furnace advantages, characteristics and principles

High temperature reheating furnaceIt is a forging heating device using gas as fuel.，is a High temperature reheating furnace，can be customized according to user's needs.。The following is to introduce the High temperature reheating furnace:

1、Brief introduction of High temperature reheating furnace

High temperature reheating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，it is widely used in Household necessities, electron, heat treatment, petroleum, war industry and other industries，the product looks beautiful.，it is an ideal choice for customers to buy High temperature reheating furnace。

High temperature reheating furnace

2、Working principle of High temperature reheating furnace

High temperature reheating furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

High temperature reheating furnace

3、High temperature reheating furnace use

The purpose of High temperature reheating furnace is introduced as follows:

1. Metal forging heating

The High temperature reheating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal forging heating

The High temperature reheating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the High temperature reheating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, High temperature reheating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature reheating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

High temperature reheating furnace

4、High temperature reheating furnace characteristics

The High temperature reheating furnace features are as follows:

1. Efficient heating

The High temperature reheating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The High temperature reheating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Strong adaptability

The High temperature reheating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

The combustion system and ventilation system of the High temperature reheating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

High temperature reheating furnace

5、High temperature reheating furnace structure

The High temperature reheating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

High temperature reheating furnace

6、High temperature reheating furnace price consultation

The High temperature reheating furnace price is introduced as follows:

1. market factors

When the market demand for High temperature reheating furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

2. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. Parameter size

Specifications and models have a great influence on the price of High temperature reheating furnace, so different specifications and models have different selling prices. Customers can reasonably select product specifications and models according to their own needs, so that products can meet their own required standards in terms of specifications and prices.

4. geographical position

One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

5. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

High temperature reheating furnace

High temperature reheating furnaceThe overall structural design is simple, diverse and beautiful.，the main structure includes Radiation chamber, convection chamber, ventilation system, furnace chamber, ventilation system and so on，It is mostly used in Metal heat treatment, Energy conservation and environmental protection, Metal forging heating, Metal melting and casting, Metal tempering, Metal melting and casting and so on，is a High temperature reheating furnace。