Introduction to Carburizing and quenching industrial furnace and forging furnace advantages and features

Carburizing and quenching industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，is a popular Carburizing and quenching industrial furnace，it is an ideal choice for customers to buy Carburizing and quenching industrial furnace。

1、Brief introduction of Carburizing and quenching industrial furnace

Carburizing and quenching industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Carburizing and quenching industrial furnace

2、Introduction of Carburizing and quenching industrial furnace characteristics

Carburizing and quenching industrial furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Carburizing and quenching industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Carburizing and quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Carburizing and quenching industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Carburizing and quenching industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Strong adaptability

The Carburizing and quenching industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Carburizing and quenching industrial furnace

3、Carburizing and quenching industrial furnace field real shot

Speak directly with facts on the spot。

Carburizing and quenching industrial furnace

As you can see from the live video.，One-combustion energy saving it is mainly composed of ventilation system, recovery of waste heat, furnace chamber, combustor and ventilation system，This Carburizing and quenching industrial furnaceThe overall structural design is simple and novel.。

4、Carburizing and quenching industrial furnace application

Carburizing and quenching industrial furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Carburizing and quenching industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Carburizing and quenching industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Carburizing and quenching industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Carburizing and quenching industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Carburizing and quenching industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Carburizing and quenching industrial furnace

5、Carburizing and quenching industrial furnace function

Carburizing and quenching industrial furnacemultifunctional, with functions such as hardening and tempering, temper, hardening and tempering, anneal and Casting heating，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a kind of high quality and low price Carburizing and quenching industrial furnace，was developed and designed by One-combustion energy saving。

Carburizing and quenching industrial furnace

6、How much is the Carburizing and quenching industrial furnace?

The Carburizing and quenching industrial furnace price is introduced as follows:

1. Less intermediate links

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

2. mass discrepancy

The price of Carburizing and quenching industrial furnace is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Carburizing and quenching industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Carburizing and quenching industrial furnace price can meet the purchasing needs of customers.

4. Product configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Carburizing and quenching industrial furnace has a higher cost performance.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Carburizing and quenching industrial furnace

Carburizing and quenching industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of normalizing, quench, heat treatment, temper and Forging heating。