What is a Normalizing furnace multi chamber type? Introduction to the advantages, characteristics, and principles of the heating furnace

Normalizing furnace multi chamber typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The price is more affordable。

1、Brief introduction of Normalizing furnace multi chamber type

Normalizing furnace multi chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Normalizing furnace multi chamber type

2、Normalizing furnace multi chamber type use

The purpose of Normalizing furnace multi chamber type is introduced as follows:

1. Metal forging heating

The Normalizing furnace multi chamber type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Normalizing furnace multi chamber types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Normalizing furnace multi chamber types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Normalizing furnace multi chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Normalizing furnace multi chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Normalizing furnace multi chamber type

3、Normalizing furnace multi chamber type function

Normalizing furnace multi chamber typemultifunctional, with functions such as temper, heat treatment, hardening and tempering, temper and Casting heating。

Normalizing furnace multi chamber type

4、Normalizing furnace multi chamber type characteristics

The Normalizing furnace multi chamber type features are as follows:

1. Easy to control

The combustion system and ventilation system of the Normalizing furnace multi chamber type can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Efficient heating

The Normalizing furnace multi chamber type can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Normalizing furnace multi chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Normalizing furnace multi chamber type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Normalizing furnace multi chamber type

5、Working principle of Normalizing furnace multi chamber type

Normalizing furnace multi chamber typeat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，generally, it is composed of recovery of waste heat, convection chamber, ventilation system, furnace chamber, ventilation system and other major components，Normalizing furnace multi chamber typeThe overall structural design is relatively simple，the product looks beautiful.，is a kind of Normalizing furnace multi chamber type manufactured by One-combustion energy saving。

Normalizing furnace multi chamber type

6、Normalizing furnace multi chamber type quotation

The Normalizing furnace multi chamber type price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. model

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Normalizing furnace multi chamber type, which have different models and different performances. Therefore, these are all factors that affect the price change of Normalizing furnace multi chamber type.

3. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. Self quality

The Normalizing furnace multi chamber type is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. One-combustion energy saving has always adhered to high quality in the construction of Normalizing furnace multi chamber type and won the trust of customers.

5. company strength

Our company's expected profit value of Normalizing furnace multi chamber type is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Normalizing furnace multi chamber type is relatively low.

Normalizing furnace multi chamber type

Normalizing furnace multi chamber typeis a Normalizing furnace multi chamber type，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。