What is a Burner heating furnace chamber type? Introduction to the Working Principle of heating furnace

Burner heating furnace chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，it has the functions of heat treatment, anneal, hardening and tempering, normalizing and quench，it is an ideal choice for customers to buy Burner heating furnace chamber type。The following is to introduce the Burner heating furnace chamber type:

1、Brief introduction of Burner heating furnace chamber type

Burner heating furnace chamber typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Burner heating furnace chamber type

2、Structural advantages of Burner heating furnace chamber type

The Burner heating furnace chamber type has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Burner heating furnace chamber type heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Burner heating furnace chamber type

3、Burner heating furnace chamber type characteristics

Burner heating furnace chamber type has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Burner heating furnace chamber type further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Efficient heating

The Burner heating furnace chamber type can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The Burner heating furnace chamber type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to maintain

The structural design of the Burner heating furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Burner heating furnace chamber type

4、Working principle of Burner heating furnace chamber type

Burner heating furnace chamber typein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a kind of high quality and low price Burner heating furnace chamber type。

Burner heating furnace chamber type

5、Burner heating furnace chamber type function

Burner heating furnace chamber typemultifunctional, with functions such as Forging heating, hardening and tempering, normalizing, quench and Forging heating，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.，super quality and competitive price。

Burner heating furnace chamber type

6、Burner heating furnace chamber type quotation

The Burner heating furnace chamber type price is introduced as follows:

1. deploy

Usually, the quotation of Burner heating furnace chamber type changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving located in Jinan, Shandong province., where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

3. market competition

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. One-combustion energy saving has a deep understanding of this factor, so the price of our Burner heating furnace chamber type is more reasonable.

4. model

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Burner heating furnace chamber type has excellent performance, so it also makes the sales price high.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Burner heating furnace chamber type manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Burner heating furnace chamber type price can meet the purchasing needs of customers.

Burner heating furnace chamber type

Burner heating furnace chamber typethe product looks atmospheric.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is mainly composed of ventilation system, convection chamber, Radiation chamber, recovery of waste heat and combustor，This Burner heating furnace chamber typeThe overall structural design is simple, diverse and beautiful.。