Introduction to Mold quenching furnace chamber type, advantages, characteristics and principles of Forging furnace

Mold quenching furnace chamber typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as Casting heating, heat treatment, hardening and tempering, normalizing and quench。

1、Brief introduction of Mold quenching furnace chamber type

Mold quenching furnace chamber typeIt is a forging heating device using gas as fuel.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

Mold quenching furnace chamber type

2、Mold quenching furnace chamber type function

Mold quenching furnace chamber typeit has the functions of Forging heating, normalizing, hardening and tempering, quench and temper，Simple structure and advanced technology.，it has the structure of convection chamber, recovery of waste heat, ventilation system, ventilation system and Radiation chamber，can be customized according to user's needs.。

Mold quenching furnace chamber type

3、Mold quenching furnace chamber type application

Mold quenching furnace chamber types have the following purposes.

1. Energy conservation and environmental protection

The Mold quenching furnace chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Mold quenching furnace chamber type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Mold quenching furnace chamber type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Mold quenching furnace chamber types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Mold quenching furnace chamber type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Mold quenching furnace chamber type

4、Introduction of Mold quenching furnace chamber type characteristics

Mold quenching furnace chamber type has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Mold quenching furnace chamber types are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Efficient heating

The Mold quenching furnace chamber type can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Stable and reliable

The Mold quenching furnace chamber type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Mold quenching furnace chamber type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to maintain

The structural design of the Mold quenching furnace chamber type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Mold quenching furnace chamber type

5、Mold quenching furnace chamber type video

Speak directly with facts on the spot。

Mold quenching furnace chamber type

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

Mold quenching furnace chamber typemultifunctional, with functions such as anneal, heat treatment, Casting heating, Forging heating and normalizing，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。