Introduction to Multi tube heating furnace, introduction to heating furnace function advantages and characteristics

Multi tube heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering,Metal heat treatment and so on，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Multi tube heating furnace:

1、Brief introduction of Multi tube heating furnace

Multi tube heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Multi tube heating furnace

2、Introduction of Multi tube heating furnace characteristics

Multi tube heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Multi tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Multi tube heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Multi tube heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Multi tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Multi tube heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Multi tube heating furnace

3、Multi tube heating furnace application

Multi tube heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Multi tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Multi tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Multi tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Multi tube heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Multi tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Multi tube heating furnace

4、Structural characteristics of Multi tube heating furnace

The Multi tube heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Multi tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Multi tube heating furnace

5、Multi tube heating furnace advantage

Multi tube heating furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Multi tube heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Multiple fuel options

Although the Multi tube heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Multi tube heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Improve product quality

Because the Multi tube heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Multi tube heating furnace

Multi tube heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Multi tube heating furnace，it has the functions of anneal, quench, Forging heating, anneal and normalizing。