Introduction to Heat treatment tube furnace, introduction to Forging furnace advantages and characteristics

Heat treatment tube furnaceIt is a forging heating device using gas as fuel.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

1、Brief introduction of Heat treatment tube furnace

Heat treatment tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has been widely used in war industry, light industry, petroleum, machinery, chemical industry and other industries，is carefully developed by One-combustion energy saving combined with advanced technology。

Heat treatment tube furnace

2、Heat treatment tube furnace customer scene picture

Provide a variety of specifications and models of Heat treatment tube furnace, high-definition picture list.。

Heat treatment tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Heat treatment tube furnace advantage

The advantages of Heat treatment tube furnace are as follows:

1. Intelligent control

The Heat treatment tube furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. easy to operate

The operation interface of the Heat treatment tube furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Efficient combustion

The Heat treatment tube furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Improve product quality

Because the Heat treatment tube furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The Heat treatment tube furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Heat treatment tube furnace

4、Introduction of Heat treatment tube furnace characteristics

Heat treatment tube furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Heat treatment tube furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to maintain

The structural design of the Heat treatment tube furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Heat treatment tube furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Heat treatment tube furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Heat treatment tube furnace

5、Heat treatment tube furnace function

Heat treatment tube furnaceit has the functions of Forging heating, normalizing, temper, quench and anneal，can be customized according to user's needs.。

Heat treatment tube furnace

Heat treatment tube furnaceNatural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the main structure includes furnace chamber, recovery of waste heat, Radiation chamber, ventilation system, recovery of waste heat and so on，This Heat treatment tube furnaceSimple structure and advanced technology.。