What is a Rotary tube annealing furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Rotary tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，It can be used for Metal heat treatment, Metal tempering, Improve production efficiency, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency and so on，multifunctional, with functions such as normalizing, heat treatment, quench, temper and temper，be loved by our customers.。

1、Brief introduction of Rotary tube annealing furnace

Rotary tube annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，is a kind of Rotary tube annealing furnace manufactured by One-combustion energy saving。

Rotary tube annealing furnace

2、Rotary tube annealing furnace application

Rotary tube annealing furnaces have the following purposes.

1. Metal forging heating

The Rotary tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Rotary tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Rotary tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Rotary tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Rotary tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Rotary tube annealing furnace

3、Rotary tube annealing furnace function

Rotary tube annealing furnaceit has the functions of hardening and tempering, Casting heating, anneal, heat treatment and normalizing，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is based on One-combustion energy saving is an advanced Rotary tube annealing furnace developed by our company in combination with the actual situation of the industry。

Rotary tube annealing furnace

4、Rotary tube annealing furnace HD real picture

Rotary tube annealing furnace high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Rotary tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Advantages of Rotary tube annealing furnace principle

Rotary tube annealing furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Rotary tube annealing furnace

6、Rotary tube annealing furnace real beat

High-definition picture shooting for various Rotary tube annealing furnace, all-round display, exquisite appearance, excellent quality and trustworthy.。

Rotary tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Rotary tube annealing furnacemultifunctional, with functions such as quench, Forging heating, temper, Casting heating and anneal，the product looks atmospheric.。