What is a Cylindrical tube annealing furnace? Introduction to the advantages and characteristics of the forging furnace

Cylindrical tube annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Commonly used inMetal forging heating,Metal tempering,Energy conservation and environmental protection,Metal melting and casting,Metal heat treatment and so on，the product looks atmospheric.，it is widely used inshipping,machinery,automobile,Household necessities,light industry and other industries，The structural design is more advanced and reasonable.，structure mainly includes: convection chamber, recovery of waste heat, furnace chamber, Radiation chamber, combustor and so on。The following is to introduce the Cylindrical tube annealing furnace:

1、Brief introduction of Cylindrical tube annealing furnace

Cylindrical tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks atmospheric.。

Cylindrical tube annealing furnace

2、Structural characteristics of Cylindrical tube annealing furnace

The Cylindrical tube annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Cylindrical tube annealing furnace

3、Video analysis of Cylindrical tube annealing furnace

The following is the live video of Cylindrical tube annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs. of One-combustion energy savingproduce的Cylindrical tube annealing furnace.。

Cylindrical tube annealing furnace

As you can see from the live video.，One-combustion energy saving is a Cylindrical tube annealing furnace。

4、Introduction of Cylindrical tube annealing furnace characteristics

Cylindrical tube annealing furnace has the following characteristics

1. Stable and reliable

The Cylindrical tube annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Efficient heating

The Cylindrical tube annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Cylindrical tube annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Cylindrical tube annealing furnace

5、Cylindrical tube annealing furnace application

Cylindrical tube annealing furnaces have the following purposes.

1. Improve production efficiency

The Cylindrical tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Cylindrical tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal tempering

By properly heating and cooling the metal material, the Cylindrical tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Cylindrical tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Cylindrical tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Cylindrical tube annealing furnace

6、Cylindrical tube annealing furnace quotation

The Cylindrical tube annealing furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Cylindrical tube annealing furnace have more or less differences in price.

2. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

3. Model size

There are many specifications and models of Cylindrical tube annealing furnace, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

4. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. region

One-combustion energy saving located in Jinan, Shandong province., the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

Cylindrical tube annealing furnace

Cylindrical tube annealing furnacemultifunctional, with functions such as anneal, Casting heating, Forging heating, normalizing and heat treatment，is a popular Cylindrical tube annealing furnace，It has a wide range of uses, including Improve production efficiency, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and Metal melting and casting。