Introduction to Regenerative gas tube quenching furnace, introduction to heating furnace advantages and characteristics

Regenerative gas tube quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of Casting heating, heat treatment, anneal, temper and quench，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is an ideal choice for customers to buy Regenerative gas tube quenching furnace。The following is to introduce the Regenerative gas tube quenching furnace:

1、Brief introduction of Regenerative gas tube quenching furnace

Regenerative gas tube quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are Stable and reliable, energy saving and environmental protection, energy saving and environmental protection, Stable and reliable and Easy to maintain，Cheap and high quality。

Regenerative gas tube quenching furnace

2、Structural characteristics of Regenerative gas tube quenching furnace

The Regenerative gas tube quenching furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Regenerative gas tube quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative gas tube quenching furnace

3、Regenerative gas tube quenching furnace use

The purpose of Regenerative gas tube quenching furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas tube quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Regenerative gas tube quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Regenerative gas tube quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Regenerative gas tube quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Regenerative gas tube quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative gas tube quenching furnace

4、Regenerative gas tube quenching furnace function

Regenerative gas tube quenching furnacemultifunctional, with functions such as Forging heating, Casting heating, quench, hardening and tempering and temper，It can be used for Improve production efficiency, Metal tempering, Metal heat treatment, Improve production efficiency, Metal melting and casting, Metal heat treatment and so on，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，support customization。

Regenerative gas tube quenching furnace

5、Regenerative gas tube quenching furnace introduction video

Speak directly with facts on the spot。

Regenerative gas tube quenching furnace

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

Regenerative gas tube quenching furnacewidely used inchemical industry,aerospace,heat treatment,building materials,Household necessities and other industries，It is a forging heating device using gas as fuel.，is a kind of high quality and low price Regenerative gas tube quenching furnace。