What is a Automatic temperature regulating tube annealing furnace? How much is the price of the Forging furnace?

Automatic temperature regulating tube annealing furnaceIt is a forging heating device using gas as fuel.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。The following is to introduce the Automatic temperature regulating tube annealing furnace:

1、Brief introduction of Automatic temperature regulating tube annealing furnace

Automatic temperature regulating tube annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is mostly used in Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection, Metal tempering, Metal forging heating and so on。

Automatic temperature regulating tube annealing furnace

2、Advantages of Automatic temperature regulating tube annealing furnace principle

Automatic temperature regulating tube annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a Automatic temperature regulating tube annealing furnace newly developed by One-combustion energy saving。

Automatic temperature regulating tube annealing furnace

3、Introduction of Automatic temperature regulating tube annealing furnace characteristics

Automatic temperature regulating tube annealing furnace has the following characteristics

1. Efficient heating

The Automatic temperature regulating tube annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Automatic temperature regulating tube annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature regulating tube annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Automatic temperature regulating tube annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Automatic temperature regulating tube annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Automatic temperature regulating tube annealing furnace

4、Structural characteristics of Automatic temperature regulating tube annealing furnace

The Automatic temperature regulating tube annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Automatic temperature regulating tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Automatic temperature regulating tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Automatic temperature regulating tube annealing furnace

5、On-site real shot of Automatic temperature regulating tube annealing furnace

The styles and designs of Automatic temperature regulating tube annealing furnace are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

Automatic temperature regulating tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、One-combustion energy saving workshop pictures

The finished products of the Automatic temperature regulating tube annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Automatic temperature regulating tube annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Automatic temperature regulating tube annealing furnacethe product looks atmospheric.，multifunctional, with functions such as Casting heating, Forging heating, anneal, normalizing and temper，it is widely used in metallurgy, light industry, war industry, petroleum, surface treatment and other industries。