What is a Trolley tempering furnace? Introduction to the advantages and characteristics of forging furnace functions

Trolley tempering furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Cheap and high quality。The following is to introduce the Trolley tempering furnace:

1、Brief introduction of Trolley tempering furnace

Trolley tempering furnaceIt is a forging heating device using gas as fuel.，it mainly includes ventilation system, combustor, convection chamber, recovery of waste heat and ventilation system，the product looks beautiful.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a kind of Trolley tempering furnace manufactured by One-combustion energy saving。

Trolley tempering furnace

2、Working principle of Trolley tempering furnace

Trolley tempering furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，support customization。

Trolley tempering furnace

3、Trolley tempering furnace function

Trolley tempering furnaceit has the functions of Casting heating, hardening and tempering, quench, heat treatment and normalizing，is an advanced Trolley tempering furnace developed by our company in combination with the actual situation of the industry。

Trolley tempering furnace

4、Trolley tempering furnace use

The purpose of Trolley tempering furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Trolley tempering furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Trolley tempering furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Trolley tempering furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Trolley tempering furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley tempering furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Trolley tempering furnace

5、Trolley tempering furnace price

The Trolley tempering furnace price is introduced as follows:

1. Cost input

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

2. company strength

There are many Trolley tempering furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

3. market

When the market demand for Trolley tempering furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

4. mass discrepancy

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Trolley tempering furnace.

5. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Trolley tempering furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Trolley tempering furnace price can meet the purchasing needs of customers.

Trolley tempering furnace

6、One-combustion energy saving's after-sales service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Trolley tempering furnaceThe overall structural design is relatively simple，it is mainly composed of combustor, furnace chamber, ventilation system, Radiation chamber and convection chamber，Widely used in Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal tempering and Energy conservation and environmental protection，is a Trolley tempering furnace。