Introduction to Trolley normalizing heating furnace, how much is the price of the forging furnace?

Trolley normalizing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，favorable price。

1、Brief introduction of Trolley normalizing heating furnace

Trolley normalizing heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in building materials, shipping, metallurgy, Household necessities, war industry and other industries，Structure consists of recovery of waste heat, ventilation system, convection chamber, Radiation chamber, ventilation system and so on，productThe structural design is simple, novel and special.，support customization。

Trolley normalizing heating furnace

2、Trolley normalizing heating furnace principle

Trolley normalizing heating furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the structure of Radiation chamber, ventilation system, combustor, ventilation system and furnace chamber，features include Strong adaptability, Easy to control, Easy to maintain, Stable and reliable and energy saving and environmental protection，is designed by One-combustion energy saving with advanced technology。

Trolley normalizing heating furnace

3、Trolley normalizing heating furnace application

Trolley normalizing heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Trolley normalizing heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Trolley normalizing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Trolley normalizing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Trolley normalizing heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley normalizing heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Trolley normalizing heating furnace

4、Structural advantages of Trolley normalizing heating furnace

The Trolley normalizing heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Trolley normalizing heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Trolley normalizing heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Trolley normalizing heating furnace

5、Trolley normalizing heating furnace characteristics

The Trolley normalizing heating furnace features are as follows:

1. Efficient heating

The Trolley normalizing heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Trolley normalizing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Trolley normalizing heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Trolley normalizing heating furnace

6、Trolley normalizing heating furnace price advantage

The Trolley normalizing heating furnace price is introduced as follows:

1. Configuration difference

Usually, the quotation of Trolley normalizing heating furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Trolley normalizing heating furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

3. market factors

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Trolley normalizing heating furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

4. company strength

Although there are many manufacturers of products in Jinan, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. regional advantages

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Trolley normalizing heating furnace.

Trolley normalizing heating furnace

Trolley normalizing heating furnacethe product looks beautiful.，The overall structural design is relatively simple，it is mainly composed of furnace chamber, combustor, recovery of waste heat, convection chamber and furnace chamber。