Introduction to Trolley type heating annealing furnace, introduction to heating furnace function advantages and characteristics

Trolley type heating annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the structure of combustor, convection chamber, furnace chamber, Radiation chamber and recovery of waste heat，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

1、Brief introduction of Trolley type heating annealing furnace

Trolley type heating annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Trolley type heating annealing furnace

2、Introduction of Trolley type heating annealing furnace characteristics

Trolley type heating annealing furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Trolley type heating annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Strong adaptability

The Trolley type heating annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Trolley type heating annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Trolley type heating annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley type heating annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Trolley type heating annealing furnace

3、Trolley type heating annealing furnace function

Trolley type heating annealing furnaceit has the functions of anneal, quench, temper, normalizing and heat treatment，the product looks beautiful.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，was developed and designed by One-combustion energy saving。

Trolley type heating annealing furnace

4、Trolley type heating annealing furnace structure

The Trolley type heating annealing furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Trolley type heating annealing furnace

5、Trolley type heating annealing furnace working site

You can buy Trolley type heating annealing furnace according to your needs and show you Trolley type heating annealing furnace videos.。

Trolley type heating annealing furnace

As you can see from the live video.，One-combustion energy saving Widely used in Improve production efficiency, Metal heat treatment, Metal melting and casting, Metal tempering and Metal melting and casting。

6、Trolley type heating annealing furnace display

Provide a variety of specifications and models of Trolley type heating annealing furnace, high-definition picture list.。

Trolley type heating annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Trolley type heating annealing furnaceenergy saving and environmental protection,Strong adaptability,Stable and reliable,Easy to maintain,energy saving and environmental protection，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。