Introduction to Dual car strip annealing furnace, Forging furnace advantages, characteristics and principles

Dual car strip annealing furnaceIt is a forging heating device using gas as fuel.，energy saving and environmental protection,Strong adaptability,Easy to control,Easy to maintain,Stable and reliable，it is widely used in automobile, Machinery manufacturing, building materials, petroleum and surface treatment，has been favored by more and more customers.。

1、Brief introduction of Dual car strip annealing furnace

Dual car strip annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Dual car strip annealing furnace。

Dual car strip annealing furnace

2、Dual car strip annealing furnace function

Dual car strip annealing furnaceit has the functions of hardening and tempering, heat treatment, quench, anneal and temper，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Dual car strip annealing furnace，support customization。

Dual car strip annealing furnace

3、Structural characteristics of Dual car strip annealing furnace

The Dual car strip annealing furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Radiation chamber

The heat load of the main place for Dual car strip annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Dual car strip annealing furnace

4、Working principle of Dual car strip annealing furnace

Dual car strip annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has the functions of Metal heat treatment, Metal tempering, Improve production efficiency, Metal melting and casting and Energy conservation and environmental protection，reliable quality。

Dual car strip annealing furnace

5、Dual car strip annealing furnace use

The purpose of Dual car strip annealing furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Dual car strip annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Dual car strip annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Dual car strip annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual car strip annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Dual car strip annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Dual car strip annealing furnace

6、Dual car strip annealing furnace price consultation

The Dual car strip annealing furnace price is introduced as follows:

1. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. Company size

There are many Dual car strip annealing furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

3. product model

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Dual car strip annealing furnace

Dual car strip annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。