What is a Segmented trolley furnace? Introduction to the principle of Forging furnace structure

Segmented trolley furnaceIt is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Segmented trolley furnace。

1、Brief introduction of Segmented trolley furnace

Segmented trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of Forging heating, quench, anneal, hardening and tempering and anneal，The price is relatively low.，be of high quality。

Segmented trolley furnace

2、Segmented trolley furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Segmented trolley furnace production process and production site, and gain favorable comments and recognition from customers.。

Segmented trolley furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

3、Physical picture of Segmented trolley furnace

Haide Segmented trolley furnace manufacturing factory。

Segmented trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Segmented trolley furnace characteristics

Segmented trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Segmented trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Segmented trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Efficient heating

The Segmented trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Stable and reliable

The Segmented trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Segmented trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Segmented trolley furnace

5、Structural characteristics of Segmented trolley furnace

The Segmented trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Segmented trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Segmented trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Segmented trolley furnace

6、Segmented trolley furnace price concessions

The Segmented trolley furnace price is introduced as follows:

1. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. Low cost of raw materials

A Segmented trolley furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

4. Configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

5. Brand strength

At present, there are various brands of Segmented trolley furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Segmented trolley furnace are different.

Segmented trolley furnace

Segmented trolley furnacefeatures include Stable and reliable, Strong adaptability, Easy to control, energy-efficient and energy saving and environmental protection，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。