What is a Medium sized trolley furnace? Introduction to the advantages and characteristics of the Forging furnace

Medium sized trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used in machinery, electron, automobile, shipping, surface treatment and other fields，is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Medium sized trolley furnace

Medium sized trolley furnaceIt is a forging heating device using gas as fuel.，it is mainly composed of furnace chamber, combustor, recovery of waste heat, ventilation system and convection chamber，This Medium sized trolley furnaceThe structure is novel, special, advanced, reasonable and scientific.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it is an ideal choice for customers to buy Medium sized trolley furnace。

Medium sized trolley furnace

2、Functional advantages of Medium sized trolley furnace

Medium sized trolley furnaces have the following advantages.

1. Rapid temperature rise

The Medium sized trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. easy to operate

The operation interface of the Medium sized trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Efficient combustion

The Medium sized trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. easy to operate

The operation interface of the Medium sized trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Medium sized trolley furnace

3、Introduction of Medium sized trolley furnace characteristics

Medium sized trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Medium sized trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Medium sized trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to maintain

The structural design of the Medium sized trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Medium sized trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to control

The combustion system and ventilation system of the Medium sized trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Medium sized trolley furnace

4、Working principle of Medium sized trolley furnace

Medium sized trolley furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Medium sized trolley furnace

5、Medium sized trolley furnace HD picture real shot

Medium sized trolley furnace HD factory map, all-round shooting, for our customers to visit.。

Medium sized trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Medium sized trolley furnace price advantage

The Medium sized trolley furnace price is introduced as follows:

1. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Medium sized trolley furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Medium sized trolley furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. Quality advantages and disadvantages

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Model size

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Medium sized trolley furnace has excellent performance, so it also makes the sales price high.

Medium sized trolley furnace

Medium sized trolley furnaceit is mainly composed of furnace chamber, ventilation system, ventilation system, convection chamber and Radiation chamber，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。