What is a Two end high-temperature gas trolley furnace? How much is the price of the forging furnace?

Two end high-temperature gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，It is mostly used in Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency, Metal heat treatment and so on，it is an ideal choice for customers to buy Two end high-temperature gas trolley furnace。The following is to introduce the Two end high-temperature gas trolley furnace:

1、Brief introduction of Two end high-temperature gas trolley furnace

Two end high-temperature gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Two end high-temperature gas trolley furnace

2、Introduction of advantages of Two end high-temperature gas trolley furnace

The advantages of Two end high-temperature gas trolley furnace are as follows:

1. Wide application range

The Two end high-temperature gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Efficient combustion

The Two end high-temperature gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Two end high-temperature gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Improve product quality

Because the Two end high-temperature gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Two end high-temperature gas trolley furnace

3、Two end high-temperature gas trolley furnace function

Two end high-temperature gas trolley furnaceit has the functions of anneal, Forging heating, temper, Casting heating and hardening and tempering，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，super quality and competitive price。

Two end high-temperature gas trolley furnace

4、Structural characteristics of Two end high-temperature gas trolley furnace

The Two end high-temperature gas trolley furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Two end high-temperature gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Two end high-temperature gas trolley furnace

5、Introduction of Two end high-temperature gas trolley furnace characteristics

Two end high-temperature gas trolley furnace has the following characteristics

1. Stable and reliable

The Two end high-temperature gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Two end high-temperature gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Two end high-temperature gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Two end high-temperature gas trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Two end high-temperature gas trolley furnace

6、One-combustion energy saving after-sales service

One-combustion energy saving has perfect and reasonable after-sales service, which can solve customers' problems in a short time and reduce customers' losses. One-combustion energy saving can provide strong protection for customers in the later stage.。

One-combustion energy saving

Two end high-temperature gas trolley furnaceit has the characteristics of Easy to control, energy-efficient, Easy to maintain, energy saving and environmental protection and Stable and reliable，it has been widely used in shipping, Machinery manufacturing, aerospace, electron, metallurgy and other industries，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。