Introduction to Heat treatment equipment trolley heating furnace, heating furnace specifications, model parameters

Heat treatment equipment trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are Strong adaptability, Easy to maintain, Strong adaptability, energy saving and environmental protection and Stable and reliable，it is usually composed of ventilation system, recovery of waste heat, ventilation system, convection chamber and combustor，Heat treatment equipment trolley heating furnaceSimple structure and reliable operation.，multifunctional, with functions such as normalizing, Casting heating, quench, anneal and temper，it is an ideal choice for customers to buy Heat treatment equipment trolley heating furnace。

1、Brief introduction of Heat treatment equipment trolley heating furnace

Heat treatment equipment trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is a product series that integrates Metal tempering, Metal melting and casting, Improve production efficiency, Metal forging heating and Metal heat treatment，is a Heat treatment equipment trolley heating furnace。

Heat treatment equipment trolley heating furnace

2、Heat treatment equipment trolley heating furnace function

Heat treatment equipment trolley heating furnacemultifunctional, with functions such as hardening and tempering, Forging heating, temper, quench and normalizing。

Heat treatment equipment trolley heating furnace

3、Heat treatment equipment trolley heating furnace characteristics

The Heat treatment equipment trolley heating furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Efficient heating

The Heat treatment equipment trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

The combustion system and ventilation system of the Heat treatment equipment trolley heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Heat treatment equipment trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Heat treatment equipment trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Heat treatment equipment trolley heating furnace

4、Heat treatment equipment trolley heating furnace structure composition

The Heat treatment equipment trolley heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Heat treatment equipment trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Heat treatment equipment trolley heating furnace

5、Working principle of Heat treatment equipment trolley heating furnace

Heat treatment equipment trolley heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is an efficient, energy-saving and environment-friendly metal heating device.，usually used in material, war industry, light industry, automobile, chemical industry and other fields，be loved by our customers.。

Heat treatment equipment trolley heating furnace

Heat treatment equipment trolley heating furnaceIt is a forging heating device using gas as fuel.，is a common Heat treatment equipment trolley heating furnace。