Introduction to All carbon fiber high-temperature trolley heating furnace and heating furnace advantages and features

All carbon fiber high-temperature trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as hardening and tempering, Casting heating, hardening and tempering, anneal and temper，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，Cheap and high quality。

1、Brief introduction of All carbon fiber high-temperature trolley heating furnace

All carbon fiber high-temperature trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

All carbon fiber high-temperature trolley heating furnace

2、All carbon fiber high-temperature trolley heating furnace performance advantage

The advantages of All carbon fiber high-temperature trolley heating furnace are as follows:

1. Rapid temperature rise

The All carbon fiber high-temperature trolley heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Improve product quality

Because the All carbon fiber high-temperature trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Multiple fuel options

Although the All carbon fiber high-temperature trolley heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Wide application range

The All carbon fiber high-temperature trolley heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Extend the service life of equipment

The All carbon fiber high-temperature trolley heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

All carbon fiber high-temperature trolley heating furnace

3、All carbon fiber high-temperature trolley heating furnace picture

Provide a variety of specifications and models of All carbon fiber high-temperature trolley heating furnace, high-definition picture list.。

All carbon fiber high-temperature trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、All carbon fiber high-temperature trolley heating furnace structure composition

The All carbon fiber high-temperature trolley heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Radiation chamber

The heat load of the main place for All carbon fiber high-temperature trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

All carbon fiber high-temperature trolley heating furnace

5、All carbon fiber high-temperature trolley heating furnace display

Various specifications and models of All carbon fiber high-temperature trolley heating furnace are displayed for our customers to visit.。

All carbon fiber high-temperature trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、All carbon fiber high-temperature trolley heating furnace application

All carbon fiber high-temperature trolley heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, All carbon fiber high-temperature trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The All carbon fiber high-temperature trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of All carbon fiber high-temperature trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The All carbon fiber high-temperature trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The All carbon fiber high-temperature trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

All carbon fiber high-temperature trolley heating furnace

All carbon fiber high-temperature trolley heating furnacethe product looks atmospheric.，It has the functions of Energy conservation and environmental protection, Metal tempering, Metal heat treatment, Improve production efficiency and Metal melting and casting。