Introduction to Titanium alloy heat treatment natural gas trolley furnace and heating furnace working principle

Titanium alloy heat treatment natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，widely used inwar industry,metallurgy,building materials,surface treatment,chemical industry and other industries，it is widely used in Household necessities, petroleum, shipping, war industry, electron and other industries，is an advanced Titanium alloy heat treatment natural gas trolley furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Titanium alloy heat treatment natural gas trolley furnace

Titanium alloy heat treatment natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Titanium alloy heat treatment natural gas trolley furnace

2、Structural advantages of Titanium alloy heat treatment natural gas trolley furnace

The Titanium alloy heat treatment natural gas trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Titanium alloy heat treatment natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Titanium alloy heat treatment natural gas trolley furnace

3、Titanium alloy heat treatment natural gas trolley furnace performance advantage

The advantages of Titanium alloy heat treatment natural gas trolley furnace are as follows:

1. Rapid temperature rise

The Titanium alloy heat treatment natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. easy to operate

The operation interface of the Titanium alloy heat treatment natural gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Improve product quality

Because the Titanium alloy heat treatment natural gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Wide application range

The Titanium alloy heat treatment natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Titanium alloy heat treatment natural gas trolley furnace

4、Titanium alloy heat treatment natural gas trolley furnace video detail

On-site aerial photography of Titanium alloy heat treatment natural gas trolley furnace。

Titanium alloy heat treatment natural gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

5、Titanium alloy heat treatment natural gas trolley furnace structure composition

The Titanium alloy heat treatment natural gas trolley furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Titanium alloy heat treatment natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Titanium alloy heat treatment natural gas trolley furnace

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Titanium alloy heat treatment natural gas trolley furnace

As you can see from the live video.One-combustion energy saving widely used inmaterial,Machinery manufacturing,aerospace,machinery,heat treatment and other industries。

Titanium alloy heat treatment natural gas trolley furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the characteristics of Stable and reliable, Easy to maintain, Easy to control, Strong adaptability and energy-efficient。