Introduction to Regenerative gas trolley heating furnace, how much is the price of the forging furnace?

Regenerative gas trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。The following is to introduce the Regenerative gas trolley heating furnace:

1、Brief introduction of Regenerative gas trolley heating furnace

Regenerative gas trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，the product looks atmospheric.，it is mainly composed of furnace chamber, recovery of waste heat, Radiation chamber, convection chamber and ventilation system，Mainly used forMetal heat treatment,Metal tempering,Metal melting and casting,Energy conservation and environmental protection andMetal forging heating。

Regenerative gas trolley heating furnace

2、Regenerative gas trolley heating furnace application

Regenerative gas trolley heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Regenerative gas trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Regenerative gas trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Regenerative gas trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative gas trolley heating furnace

3、On-site real shot of Regenerative gas trolley heating furnace

Regenerative gas trolley heating furnace complete specifications and models, the product looks beautiful.。

Regenerative gas trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Video analysis of Regenerative gas trolley heating furnace

On-site aerial photography of Regenerative gas trolley heating furnace。

Regenerative gas trolley heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a forging heating device using gas as fuel.。

5、Structural advantages of Regenerative gas trolley heating furnace

The Regenerative gas trolley heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Regenerative gas trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Regenerative gas trolley heating furnace

6、Regenerative gas trolley heating furnace function

Regenerative gas trolley heating furnaceit has the functions of temper, quench, Casting heating, Forging heating and anneal，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，The overall structural design is simple, diverse and beautiful.，it mainly includes combustor, convection chamber, combustor, recovery of waste heat and ventilation system，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，has been favored by more and more customers.。

Regenerative gas trolley heating furnace

Regenerative gas trolley heating furnacethe product looks atmospheric.，Easy to control,Stable and reliable,energy-efficient,Easy to maintain,energy saving and environmental protection，it is mainly composed of recovery of waste heat, ventilation system, Radiation chamber, furnace chamber and ventilation system，This productThe overall structural design is simple and novel.。