What is a Energy saving and environmentally friendly trolley heating furnace? Introduction to the advantages and characteristics of the forging furnace

Energy saving and environmentally friendly trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Energy saving and environmentally friendly trolley heating furnace，it has the functions of heat treatment, Casting heating, hardening and tempering, quench and Casting heating。The following is to introduce the Energy saving and environmentally friendly trolley heating furnace:

1、Brief introduction of Energy saving and environmentally friendly trolley heating furnace

Energy saving and environmentally friendly trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in material, heat treatment, war industry, automobile and chemical industry。

Energy saving and environmentally friendly trolley heating furnace

2、Energy saving and environmentally friendly trolley heating furnace use

The purpose of Energy saving and environmentally friendly trolley heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Energy saving and environmentally friendly trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Energy saving and environmentally friendly trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving and environmentally friendly trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Energy saving and environmentally friendly trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving and environmentally friendly trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Energy saving and environmentally friendly trolley heating furnace

3、Energy saving and environmentally friendly trolley heating furnace function

Energy saving and environmentally friendly trolley heating furnacemultifunctional, with functions such as temper, heat treatment, quench, normalizing and anneal。

Energy saving and environmentally friendly trolley heating furnace

4、Physical picture of Energy saving and environmentally friendly trolley heating furnace

One-combustion energy saving Energy saving and environmentally friendly trolley heating furnace, product manufacturer, product features, is the ideal choice for new and old customers.。

Energy saving and environmentally friendly trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Energy saving and environmentally friendly trolley heating furnace structure

The Energy saving and environmentally friendly trolley heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Energy saving and environmentally friendly trolley heating furnace

Energy saving and environmentally friendly trolley heating furnaceit can be used in light industry, heat treatment, metallurgy, material, Household necessities and other industries，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Mainly used forMetal heat treatment,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency andMetal forging heating。