Introduction to walking beam reheating furnace, forging furnace advantages, characteristics and principles

walking beam reheating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the walking beam reheating furnace:

1、Brief introduction of walking beam reheating furnace

walking beam reheating furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.。

walking beam reheating furnace

2、Introduction of walking beam reheating furnace characteristics

walking beam reheating furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the walking beam reheating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Stable and reliable

The walking beam reheating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the walking beam reheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the walking beam reheating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Efficient heating

The walking beam reheating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

walking beam reheating furnace

3、Introduction of walking beam reheating furnace characteristics

walking beam reheating furnace has the following characteristics

1. Easy to maintain

The structural design of the walking beam reheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The walking beam reheating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Efficient heating

The walking beam reheating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

walking beam reheating furnace

4、Working principle of walking beam reheating furnace

walking beam reheating furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，modern technology。

walking beam reheating furnace

5、walking beam reheating furnace function

walking beam reheating furnaceit has the functions of hardening and tempering, quench, normalizing, temper and anneal，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，customizable。

walking beam reheating furnace

6、walking beam reheating furnace price advantage

The walking beam reheating furnace price is introduced as follows:

1. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

2. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

3. Overall configuration

The difference in walking beam reheating furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving walking beam reheating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the walking beam reheating furnace price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

walking beam reheating furnace

walking beam reheating furnaceIt is a product series that integrates Metal tempering, Metal forging heating, Energy conservation and environmental protection, Energy conservation and environmental protection and Metal heat treatment，it is widely used in Machinery manufacturing, material, surface treatment, shipping, pharmacy and other industries，it is mainly composed of convection chamber, combustor, ventilation system, furnace chamber and convection chamber。