Introduction to Walking beam roasting furnace, introduction to heating furnace advantages and characteristics

Walking beam roasting furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has a wide range of uses, and is often used inMetal forging heating,Metal heat treatment,Metal melting and casting,Metal tempering,Energy conservation and environmental protection and so on。The following is to introduce the Walking beam roasting furnace:

1、Brief introduction of Walking beam roasting furnace

Walking beam roasting furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Walking beam roasting furnace，generally, it is composed of Radiation chamber, combustor, combustor, Radiation chamber, ventilation system and other major components，This Walking beam roasting furnaceThe structure is novel, special, advanced, reasonable and scientific.。

Walking beam roasting furnace

2、Walking beam roasting furnace function

Walking beam roasting furnaceit has the functions of quench, Forging heating, Casting heating, heat treatment and normalizing，customizable。

Walking beam roasting furnace

3、Walking beam roasting furnace use

The purpose of Walking beam roasting furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Walking beam roasting furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Walking beam roasting furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Walking beam roasting furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Walking beam roasting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Walking beam roasting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Walking beam roasting furnace

4、Walking beam roasting furnace characteristics

The Walking beam roasting furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Walking beam roasting furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Stable and reliable

The Walking beam roasting furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Walking beam roasting furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Walking beam roasting furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to maintain

The structural design of the Walking beam roasting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Walking beam roasting furnace

5、Introduction of advantages of Walking beam roasting furnace

The advantages of Walking beam roasting furnace are as follows:

1. Wide application range

The Walking beam roasting furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Multiple fuel options

Although the Walking beam roasting furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. easy to operate

The operation interface of the Walking beam roasting furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Improve product quality

Because the Walking beam roasting furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Uniform heating

The Walking beam roasting furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Walking beam roasting furnace

6、One-combustion energy saving service

With intimate service, hard quality and advanced technology, the Walking beam roasting furnace produced by One-combustion energy saving are not only guaranteed in quality but also affordable. One-combustion energy saving is always waiting for everyone's arrival.。

One-combustion energy saving

Walking beam roasting furnaceit is mainly composed of ventilation system, furnace chamber, convection chamber, recovery of waste heat and combustor，the main features are Easy to maintain, Easy to control, Strong adaptability, Easy to maintain and Strong adaptability，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。