Introduction to Natural gas regenerative step heat treatment furnace and Forging furnace working principle

Natural gas regenerative step heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of hardening and tempering, anneal, normalizing, Forging heating and quench，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，modern technology，The price is relatively low.。

1、Brief introduction of Natural gas regenerative step heat treatment furnace

Natural gas regenerative step heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Mainly used forMetal heat treatment,Metal forging heating,Improve production efficiency,Metal melting and casting andEnergy conservation and environmental protection。

Natural gas regenerative step heat treatment furnace

2、Natural gas regenerative step heat treatment furnace characteristics

The Natural gas regenerative step heat treatment furnace features are as follows:

1. Efficient heating

The Natural gas regenerative step heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Natural gas regenerative step heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Natural gas regenerative step heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Natural gas regenerative step heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Natural gas regenerative step heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Natural gas regenerative step heat treatment furnace

3、Natural gas regenerative step heat treatment furnace structure

The Natural gas regenerative step heat treatment furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Natural gas regenerative step heat treatment furnace

4、Natural gas regenerative step heat treatment furnace use

The purpose of Natural gas regenerative step heat treatment furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas regenerative step heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Natural gas regenerative step heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Natural gas regenerative step heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Natural gas regenerative step heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Natural gas regenerative step heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Natural gas regenerative step heat treatment furnace

5、Natural gas regenerative step heat treatment furnace HD real shot

The Natural gas regenerative step heat treatment furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory Forging furnace more quickly, the following high-definition pictures are provided for reference.。

Natural gas regenerative step heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、How much is the Natural gas regenerative step heat treatment furnace?

The Natural gas regenerative step heat treatment furnace price is introduced as follows:

1. Overall configuration

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Natural gas regenerative step heat treatment furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Natural gas regenerative step heat treatment furnace is reasonable for products with the same configuration.

2. Self quality

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

3. Low cost of raw materials

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Natural gas regenerative step heat treatment furnace will also fluctuate to some extent.

4. Manufacturer scale

One-combustion energy saving's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Natural gas regenerative step heat treatment furnace have more or less differences in price.

Natural gas regenerative step heat treatment furnace

Natural gas regenerative step heat treatment furnaceIt is a forging heating device using gas as fuel.，energy-efficient,Easy to control,Stable and reliable,Easy to maintain,energy saving and environmental protection。