Introduction to Environmentally friendly walking industrial furnace and Forging furnace structure principle

Environmentally friendly walking industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used inautomobile,material,surface treatment,shipping,war industry and other industries，It has a wide range of uses, including Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal tempering and Metal melting and casting，is a common Environmentally friendly walking industrial furnace，favorable price，modern technology。The following is to introduce the Environmentally friendly walking industrial furnace:

1、Brief introduction of Environmentally friendly walking industrial furnace

Environmentally friendly walking industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Environmentally friendly walking industrial furnace

2、Working principle of Environmentally friendly walking industrial furnace

Environmentally friendly walking industrial furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Mainly used forMetal forging heating,Metal melting and casting,Metal heat treatment,Improve production efficiency andMetal forging heating，It is a forging heating device using gas as fuel.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，support customization。

Environmentally friendly walking industrial furnace

3、Environmentally friendly walking industrial furnace characteristics

The Environmentally friendly walking industrial furnace features are as follows:

1. Efficient heating

The Environmentally friendly walking industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Environmentally friendly walking industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Environmentally friendly walking industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Environmentally friendly walking industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Environmentally friendly walking industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Environmentally friendly walking industrial furnace

4、Environmentally friendly walking industrial furnace structure

The Environmentally friendly walking industrial furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Environmentally friendly walking industrial furnace

5、Environmentally friendly walking industrial furnace price

The Environmentally friendly walking industrial furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Environmentally friendly walking industrial furnace have more or less differences in price.

2. quality

The quality of the Environmentally friendly walking industrial furnace is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Environmentally friendly walking industrial furnace price.

3. cost of production

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

4. deploy

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Environmentally friendly walking industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Environmentally friendly walking industrial furnace price can meet the purchasing needs of customers.

Environmentally friendly walking industrial furnace

6、One-combustion energy saving's strength

The company has many years of Environmentally friendly walking industrial furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Environmentally friendly walking industrial furnacethe product looks beautiful.，energy-efficient,Easy to maintain,Strong adaptability,Stable and reliable,energy saving and environmental protection，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。