What is a Chain belt heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Chain belt heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is mainly composed of ventilation system, ventilation system, combustor, Radiation chamber and ventilation system，The price is low and affordable，reliable quality。

1、Brief introduction of Chain belt heating furnace

Chain belt heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Chain belt heating furnace

2、Chain belt heating furnace advantage

The advantages of Chain belt heating furnace are as follows:

1. Efficient combustion

The Chain belt heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Multiple fuel options

Although the Chain belt heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Intelligent control

The Chain belt heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Chain belt heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Improve product quality

Because the Chain belt heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Chain belt heating furnace

3、Chain belt heating furnace characteristics

The Chain belt heating furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Chain belt heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Chain belt heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Chain belt heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Chain belt heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Chain belt heating furnace

4、Functional advantages of Chain belt heating furnace

Chain belt heating furnaces have the following advantages.

1. Extend the service life of equipment

The Chain belt heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Uniform heating

The Chain belt heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Rapid temperature rise

The Chain belt heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Wide application range

The Chain belt heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Chain belt heating furnace

5、Working principle of Chain belt heating furnace

Chain belt heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Simple structure and advanced technology.，the main structure includes ventilation system, convection chamber, recovery of waste heat, furnace chamber, combustor and so on，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，be loved by our customers.。

Chain belt heating furnace

6、Chain belt heating furnace price advantage

The Chain belt heating furnace price is introduced as follows:

1. Less intermediate links

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

2. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

3. geographical position

One-combustion energy saving located in Jinan., the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. product quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Chain belt heating furnace.

Chain belt heating furnace

Chain belt heating furnaceit has the functions of normalizing, anneal, Casting heating, heat treatment and hardening and tempering，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。