What is a Chain type continuous heating furnace? How much is the price of the Forging furnace?

Chain type continuous heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.。The following is to introduce the Chain type continuous heating furnace:

1、Brief introduction of Chain type continuous heating furnace

Chain type continuous heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Easy to maintain,energy-efficient,Stable and reliable,Stable and reliable,energy saving and environmental protection，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Chain type continuous heating furnace

2、Introduction of Chain type continuous heating furnace characteristics

Chain type continuous heating furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Chain type continuous heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Chain type continuous heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Chain type continuous heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Chain type continuous heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Chain type continuous heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Chain type continuous heating furnace

3、Chain type continuous heating furnace principle

Chain type continuous heating furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Structure consists of combustor, combustor, ventilation system, Radiation chamber, ventilation system and so on。

Chain type continuous heating furnace

4、Chain type continuous heating furnace structure composition

The Chain type continuous heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Chain type continuous heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Chain type continuous heating furnace

5、Chain type continuous heating furnace use

The purpose of Chain type continuous heating furnace is introduced as follows:

1. Metal forging heating

The Chain type continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Chain type continuous heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Chain type continuous heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Chain type continuous heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain type continuous heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Chain type continuous heating furnace

6、Chain type continuous heating furnace price consultation

The Chain type continuous heating furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Chain type continuous heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Chain type continuous heating furnace are different.

2. market factors

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Chain type continuous heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Chain type continuous heating furnace price can meet the purchasing needs of customers.

4. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Chain type continuous heating furnace has a higher cost performance.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Chain type continuous heating furnace

Chain type continuous heating furnacefeatures include energy-efficient, Strong adaptability, Easy to maintain, Easy to control and Stable and reliable，widely used in Machinery manufacturing, war industry, surface treatment, machinery, Household necessities and other fields，The structure is novel, special, advanced, reasonable and scientific.，structure mainly includes: recovery of waste heat, convection chamber, Radiation chamber, furnace chamber, ventilation system and so on。