Introduction to Chain heat treatment furnace, introduction to Forging furnace function advantages and characteristics

Chain heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Chain heat treatment furnace

Chain heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Widely used in Metal melting and casting, Metal tempering, Improve production efficiency, Energy conservation and environmental protection and Metal tempering，it is an ideal choice for customers to buy Chain heat treatment furnace。

Chain heat treatment furnace

2、Chain heat treatment furnace performance advantage

The advantages of Chain heat treatment furnace are as follows:

1. Intelligent control

The Chain heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Rapid temperature rise

The Chain heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Efficient combustion

The Chain heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Chain heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

5. easy to operate

The operation interface of the Chain heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Chain heat treatment furnace

3、Chain heat treatment furnace HD real shot

The panoramic shooting of One-combustion energy saving Chain heat treatment furnace is shown as follows.。

Chain heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Chain heat treatment furnace function

Chain heat treatment furnaceit has the functions of Forging heating, heat treatment, anneal, heat treatment and anneal，It has a wide range of uses, and is often used inMetal melting and casting,Improve production efficiency,Metal forging heating,Metal heat treatment,Metal tempering and so on，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Chain heat treatment furnace，it is an ideal choice for customers to buy Chain heat treatment furnace。

Chain heat treatment furnace

5、Chain heat treatment furnace structure

The Chain heat treatment furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for Chain heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Chain heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Chain heat treatment furnace

6、Structural advantages of Chain heat treatment furnace

The Chain heat treatment furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Chain heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Chain heat treatment furnace

Chain heat treatment furnaceis a common Chain heat treatment furnace，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。