Introduction to Gas thermal storage chain annealing furnace, introduction to forging furnace advantages and characteristics

Gas thermal storage chain annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，it is widely used in pharmacy, machinery, Household necessities, aerospace and surface treatment。The following is to introduce the Gas thermal storage chain annealing furnace:

1、Brief introduction of Gas thermal storage chain annealing furnace

Gas thermal storage chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price Gas thermal storage chain annealing furnace，support customization。

Gas thermal storage chain annealing furnace

2、Gas thermal storage chain annealing furnace video

The following is the live video of Gas thermal storage chain annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved. of One-combustion energy savingGas thermal storage chain annealing furnace.。

Gas thermal storage chain annealing furnace

As you can see from the live video.，One-combustion energy saving Strong adaptability,Easy to maintain,Stable and reliable,energy saving and environmental protection,Stable and reliable。

3、Gas thermal storage chain annealing furnace application

Gas thermal storage chain annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas thermal storage chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Gas thermal storage chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Gas thermal storage chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Gas thermal storage chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Gas thermal storage chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Gas thermal storage chain annealing furnace

4、Gas thermal storage chain annealing furnace HD real picture

The panoramic shooting of One-combustion energy saving Gas thermal storage chain annealing furnace is shown as follows.。

Gas thermal storage chain annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Gas thermal storage chain annealing furnace principle

Gas thermal storage chain annealing furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Easy to maintain,Easy to control,Strong adaptability,energy-efficient,Strong adaptability，It is an efficient, energy-saving and environment-friendly metal heating device.。

Gas thermal storage chain annealing furnace

Gas thermal storage chain annealing furnacethe advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks beautiful.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。