What is a Multi functional heat treatment chain furnace? How much is the price of the Forging furnace?

Multi functional heat treatment chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。The following is to introduce the Multi functional heat treatment chain furnace:

1、Brief introduction of Multi functional heat treatment chain furnace

Multi functional heat treatment chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of heat treatment, Casting heating, quench, anneal and Casting heating。

Multi functional heat treatment chain furnace

2、Introduction of Multi functional heat treatment chain furnace characteristics

Multi functional heat treatment chain furnace has the following characteristics

1. Easy to maintain

The structural design of the Multi functional heat treatment chain furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Multi functional heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Strong adaptability

The Multi functional heat treatment chain furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

The combustion system and ventilation system of the Multi functional heat treatment chain furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Multi functional heat treatment chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Multi functional heat treatment chain furnace

3、Introduction of advantages of Multi functional heat treatment chain furnace

Multi functional heat treatment chain furnaces have the following advantages.

1. easy to operate

The operation interface of the Multi functional heat treatment chain furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Multiple fuel options

Although the Multi functional heat treatment chain furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Improve product quality

Because the Multi functional heat treatment chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Extend the service life of equipment

The Multi functional heat treatment chain furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Uniform heating

The Multi functional heat treatment chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Multi functional heat treatment chain furnace

4、Multi functional heat treatment chain furnace function

Multi functional heat treatment chain furnaceit has the functions of normalizing, heat treatment, Forging heating, hardening and tempering and temper。

Multi functional heat treatment chain furnace

5、Multi functional heat treatment chain furnace structure composition

The Multi functional heat treatment chain furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Multi functional heat treatment chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Multi functional heat treatment chain furnace

6、One-combustion energy saving's strength

The company has many years of Multi functional heat treatment chain furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Multi functional heat treatment chain furnacethe product looks beautiful.，multifunctional, with functions such as quench, anneal, temper, Forging heating and hardening and tempering，energy-efficient,energy saving and environmental protection,Stable and reliable,Strong adaptability,energy-efficient。