What is a Stick style spheroidization annealing furnace? How much is the price of the forging furnace?

Stick style spheroidization annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Stick style spheroidization annealing furnace，It is a product series that integrates Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal forging heating and Metal tempering，usually used in machinery, Household necessities, material, light industry, chemical industry and other fields，multifunctional, with functions such as quench, hardening and tempering, Forging heating, hardening and tempering and anneal。

1、Brief introduction of Stick style spheroidization annealing furnace

Stick style spheroidization annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，support customization。

Stick style spheroidization annealing furnace

2、Stick style spheroidization annealing furnace structure composition

The Stick style spheroidization annealing furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Stick style spheroidization annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Stick style spheroidization annealing furnace

3、Stick style spheroidization annealing furnace application

Stick style spheroidization annealing furnaces have the following purposes.

1. Improve production efficiency

The Stick style spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Stick style spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Stick style spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Stick style spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Stick style spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Stick style spheroidization annealing furnace

4、Functional advantages of Stick style spheroidization annealing furnace

Stick style spheroidization annealing furnaces have the following advantages.

1. Improve product quality

Because the Stick style spheroidization annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Uniform heating

The Stick style spheroidization annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. easy to operate

The operation interface of the Stick style spheroidization annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Uniform heating

The Stick style spheroidization annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Improve product quality

Because the Stick style spheroidization annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Stick style spheroidization annealing furnace

5、Advantages of Stick style spheroidization annealing furnace principle

Stick style spheroidization annealing furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Stick style spheroidization annealing furnace，it has the functions of Forging heating, heat treatment, anneal, normalizing and quench，It is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Stick style spheroidization annealing furnace。

Stick style spheroidization annealing furnace

6、Stick style spheroidization annealing furnace HD picture

One-combustion energy saving Stick style spheroidization annealing furnacethe product looks beautiful., the picture is taken.。

Stick style spheroidization annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Stick style spheroidization annealing furnaceis a popular Stick style spheroidization annealing furnace，multifunctional, with functions such as quench, heat treatment, temper, normalizing and Casting heating。