Introduction to Well type annealing furnace and Forging furnace advantages and features

Well type annealing furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Well type annealing furnace

Well type annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the characteristics of Stable and reliable, Easy to maintain, Easy to control, energy saving and environmental protection and energy saving and environmental protection，It has the functions of Metal tempering, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment and Improve production efficiency。

Well type annealing furnace

2、Well type annealing furnace characteristics

The Well type annealing furnace features are as follows:

1. Efficient heating

The Well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Well type annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Well type annealing furnace

3、Well type annealing furnace use

The purpose of Well type annealing furnace is introduced as follows:

1. Metal forging heating

The Well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Well type annealing furnace

4、Well type annealing furnace function

Well type annealing furnacemultifunctional, with functions such as anneal, temper, heat treatment, hardening and tempering and Forging heating，it is an ideal choice for customers to buy Well type annealing furnace。

Well type annealing furnace

5、Well type annealing furnace structure

The Well type annealing furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Well type annealing furnace

Well type annealing furnacethe main features are Easy to maintain, Stable and reliable, Easy to control, Strong adaptability and energy-efficient，the product looks atmospheric.。