Introduction to Well type quenched and tempered annealing furnace and Forging furnace working principle

Well type quenched and tempered annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is mainly composed of convection chamber, ventilation system, furnace chamber, convection chamber and recovery of waste heat，multifunctional, with functions such as Casting heating, temper, quench, Forging heating and normalizing，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a kind of Well type quenched and tempered annealing furnace manufactured by One-combustion energy saving。

1、Brief introduction of Well type quenched and tempered annealing furnace

Well type quenched and tempered annealing furnaceIt is a forging heating device using gas as fuel.，It is mostly used in Improve production efficiency, Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment, Metal melting and casting and so on，the main structure includes Radiation chamber, ventilation system, combustor, ventilation system, furnace chamber and so on，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as quench, Casting heating, Forging heating, hardening and tempering and anneal。

Well type quenched and tempered annealing furnace

2、Well type quenched and tempered annealing furnace video

You can buy Well type quenched and tempered annealing furnace according to your needs and show you product videos.。

Well type quenched and tempered annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The overall structural design is relatively simple and compact.，structure mainly includes: Radiation chamber, combustor, recovery of waste heat, ventilation system, ventilation system and so on。

3、Well type quenched and tempered annealing furnace use

The purpose of Well type quenched and tempered annealing furnace is introduced as follows:

1. Metal forging heating

The Well type quenched and tempered annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Well type quenched and tempered annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Well type quenched and tempered annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Well type quenched and tempered annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Well type quenched and tempered annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Well type quenched and tempered annealing furnace

4、Well type quenched and tempered annealing furnace work site real shot

The Well type quenched and tempered annealing furnace has a beautiful appearance and atmosphere for our customers' reference.。

Well type quenched and tempered annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Well type quenched and tempered annealing furnace characteristics

Well type quenched and tempered annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Well type quenched and tempered annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Well type quenched and tempered annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Stable and reliable

The Well type quenched and tempered annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Well type quenched and tempered annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Well type quenched and tempered annealing furnace

6、Well type quenched and tempered annealing furnace price advantage

The Well type quenched and tempered annealing furnace price is introduced as follows:

1. Model type

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Well type quenched and tempered annealing furnace have more or less differences in price.

3. quality

Generally speaking, the higher the product quality, the higher the Well type quenched and tempered annealing furnace price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

4. Configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Well type quenched and tempered annealing furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Well type quenched and tempered annealing furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

5. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Well type quenched and tempered annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Well type quenched and tempered annealing furnace price can meet the purchasing needs of customers.

Well type quenched and tempered annealing furnace

Well type quenched and tempered annealing furnaceIt can be used for Improve production efficiency, Metal tempering, Metal forging heating, Energy conservation and environmental protection, Metal forging heating, Metal melting and casting and so on，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。