Introduction to Well type bright furnace, introduction to forging furnace advantages and characteristics

Well type bright furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main structure includes convection chamber, ventilation system, furnace chamber, convection chamber, Radiation chamber and so on。

1、Brief introduction of Well type bright furnace

Well type bright furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is an advanced Well type bright furnace developed by our company in combination with the actual situation of the industry。

Well type bright furnace

2、Well type bright furnace principle

Well type bright furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，can be customized according to user's needs.。

Well type bright furnace

3、Structural advantages of Well type bright furnace

The Well type bright furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Well type bright furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Well type bright furnace

4、Introduction of Well type bright furnace characteristics

Well type bright furnace has the following characteristics

1. Stable and reliable

The Well type bright furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Well type bright furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Well type bright furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Well type bright furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Well type bright furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Well type bright furnace

5、Well type bright furnace display

Well type bright furnace HD factory map, all-round shooting, for our customers to visit.。

Well type bright furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Well type bright furnace price

The Well type bright furnace price is introduced as follows:

1. Low cost of raw materials

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Well type bright furnace have more or less differences in price.

3. market

The Well type bright furnace market is always a fluctuating variable value. When the demand for this product in the market is far greater than the supply, the product price will be higher. On the other hand, when the market demand is much less than the supply, manufacturers are eager to sell their products and lower their prices appropriately.

4. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. Brand strength

At present, there are various brands of Well type bright furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Well type bright furnace are different.

Well type bright furnace

Well type bright furnaceit has been widely used in light industry, petroleum, chemical industry, electron, machinery and other industries，is a Well type bright furnace。