Introduction to Deep well hot-dip galvanizing furnace, introduction to forging furnace function advantages and characteristics

Deep well hot-dip galvanizing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is an ideal choice for customers to buy Deep well hot-dip galvanizing furnace。The following is to introduce the Deep well hot-dip galvanizing furnace:

1、Brief introduction of Deep well hot-dip galvanizing furnace

Deep well hot-dip galvanizing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Deep well hot-dip galvanizing furnace，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。

Deep well hot-dip galvanizing furnace

2、Deep well hot-dip galvanizing furnace characteristics

The Deep well hot-dip galvanizing furnace features are as follows:

1. Strong adaptability

The Deep well hot-dip galvanizing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Stable and reliable

The Deep well hot-dip galvanizing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Deep well hot-dip galvanizing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Deep well hot-dip galvanizing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Deep well hot-dip galvanizing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Deep well hot-dip galvanizing furnace

3、Deep well hot-dip galvanizing furnace use

The purpose of Deep well hot-dip galvanizing furnace is introduced as follows:

1. Metal forging heating

The Deep well hot-dip galvanizing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Deep well hot-dip galvanizing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Deep well hot-dip galvanizing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Deep well hot-dip galvanizing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Deep well hot-dip galvanizing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Deep well hot-dip galvanizing furnace

4、Working principle of Deep well hot-dip galvanizing furnace

Deep well hot-dip galvanizing furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The overall structural design is simple and novel.，the main structure includes recovery of waste heat, furnace chamber, ventilation system, combustor and convection chamber。

Deep well hot-dip galvanizing furnace

5、Deep well hot-dip galvanizing furnace advantage

The advantages of Deep well hot-dip galvanizing furnace are as follows:

1. Multiple fuel options

Although the Deep well hot-dip galvanizing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. easy to operate

The operation interface of the Deep well hot-dip galvanizing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Intelligent control

The Deep well hot-dip galvanizing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Uniform heating

The Deep well hot-dip galvanizing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Deep well hot-dip galvanizing furnace

6、Deep well hot-dip galvanizing furnace introduction video

The following is the live video of Deep well hot-dip galvanizing furnace designed and produced by One-combustion energy saving for users, from which we can see the Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. of Deep well hot-dip galvanizing furnace.。

Deep well hot-dip galvanizing furnace

As you can see from the live video.，One-combustion energy saving features include Strong adaptability, Stable and reliable, Easy to maintain, Stable and reliable and Strong adaptability。

Deep well hot-dip galvanizing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。