What is a High temperature well type heat treatment furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

High temperature well type heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in surface treatment, heat treatment, shipping, pharmacy and chemical industry，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it has the functions of Forging heating, Casting heating, quench, normalizing and heat treatment，it is mainly composed of ventilation system, furnace chamber, convection chamber, Radiation chamber and recovery of waste heat，This High temperature well type heat treatment furnaceThe structure is novel, special, advanced, reasonable and scientific.。The following is to introduce the High temperature well type heat treatment furnace:

1、Brief introduction of High temperature well type heat treatment furnace

High temperature well type heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a High temperature well type heat treatment furnace newly developed by One-combustion energy saving。

High temperature well type heat treatment furnace

2、High temperature well type heat treatment furnace characteristics

The High temperature well type heat treatment furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the High temperature well type heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Stable and reliable

The High temperature well type heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The High temperature well type heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some High temperature well type heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

High temperature well type heat treatment furnace

3、High temperature well type heat treatment furnace structure composition

The High temperature well type heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for High temperature well type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Radiation chamber

The heat load of the main place for High temperature well type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

High temperature well type heat treatment furnace

4、High temperature well type heat treatment furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

High temperature well type heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has been widely used in metallurgy, Household necessities, building materials, light industry, electron and other industries。

5、High temperature well type heat treatment furnace customer scene picture

The styles and designs of High temperature well type heat treatment furnace are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

High temperature well type heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

High temperature well type heat treatment furnaceIt can be used for Metal forging heating, Improve production efficiency, Metal tempering, Metal heat treatment, Metal forging heating, Improve production efficiency and so on，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，multifunctional, with functions such as temper, anneal, hardening and tempering, Forging heating and normalizing。