What is a Circular well furnace? Introduction to the Working Principle of Forging furnace

Circular well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。The following is to introduce the Circular well furnace:

1、Brief introduction of Circular well furnace

Circular well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Circular well furnace。

Circular well furnace

2、Circular well furnace use

The purpose of Circular well furnace is introduced as follows:

1. Metal forging heating

The Circular well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Circular well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Circular well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Circular well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Circular well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Circular well furnace

3、Circular well furnace characteristics

The Circular well furnace features are as follows:

1. Strong adaptability

The Circular well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Circular well furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to maintain

The structural design of the Circular well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Circular well furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Circular well furnace

4、Circular well furnace structure composition

The Circular well furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Circular well furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Circular well furnace

5、Circular well furnace quotation

The Circular well furnace price is introduced as follows:

1. geographical position

The price of Circular well furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a large professional Circular well furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Circular well furnace price positioning more reasonable, low-cost and economical.

2. Proper management mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. Brand strength

At present, there are various brands of Circular well furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Circular well furnace are different.

4. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Circular well furnace price and service can meet the actual needs of customers.

Circular well furnace

6、Company selection

Choosing a suitable Circular well furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Circular well furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Circular well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of Strong adaptability, energy-efficient, Easy to maintain, Strong adaptability and Easy to control，Simple structure and reliable operation.，Structure consists of recovery of waste heat, combustor, ventilation system, furnace chamber, Radiation chamber and so on。