Introduction to Square Well Heating Furnace, Forging furnace specifications, model parameters

Square Well Heating FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Square Well Heating Furnace:

1、Brief introduction of Square Well Heating Furnace

Square Well Heating FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Strong adaptability,Easy to control,energy-efficient,energy saving and environmental protection,Stable and reliable。

Square Well Heating Furnace

2、Square Well Heating Furnace real shot picture

One-combustion energy saving Square Well Heating Furnacethe product looks atmospheric., the following is a panoramic shot of the Square Well Heating Furnace for your reference.。

Square Well Heating Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Working principle of Square Well Heating Furnace

Square Well Heating Furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the functions of anneal, Casting heating, Forging heating, temper and heat treatment。

Square Well Heating Furnace

4、Square Well Heating Furnace HD picture real shot

High-definition pictures of Square Well Heating Furnace of different specifications and models,the product looks beautiful., reliable in quality and trustworthy.。

Square Well Heating Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Square Well Heating Furnace characteristics

Square Well Heating Furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Square Well Heating Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Square Well Heating Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to control

The combustion system and ventilation system of the Square Well Heating Furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Square Well Heating Furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Square Well Heating Furnace

6、Square Well Heating Furnace price advantage

The Square Well Heating Furnace price is introduced as follows:

1. model

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Square Well Heating Furnace has excellent performance, so it also makes the sales price high.

2. region

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Square Well Heating Furnace.

3. market demand

The amount of customers' demand for Square Well Heating Furnace in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Square Well Heating Furnace price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Square Well Heating Furnace will naturally be reduced.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. Different regions

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Square Well Heating Furnace

Square Well Heating FurnaceIt has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，It has a wide range of uses, including Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Metal tempering and Improve production efficiency，the product looks atmospheric.。