What is a Double door well tube furnace? Introduction to the advantages and characteristics of Forging furnace functions

Double door well tube furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It can be used for Metal heat treatment, Metal heat treatment, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Improve production efficiency and so on，it has the functions of quench, hardening and tempering, heat treatment, anneal and Casting heating，the product looks atmospheric.。The following is to introduce the Double door well tube furnace:

1、Brief introduction of Double door well tube furnace

Double door well tube furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，features include Easy to maintain, Stable and reliable, Strong adaptability, Easy to control and energy-efficient。

Double door well tube furnace

2、Double door well tube furnace function

Double door well tube furnacemultifunctional, with functions such as normalizing, temper, Forging heating, temper and Casting heating，the product looks atmospheric.，is a Double door well tube furnace，is a kind of Double door well tube furnace manufactured by One-combustion energy saving。

Double door well tube furnace

3、Double door well tube furnace real shot picture

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Double door well tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural advantages of Double door well tube furnace

The Double door well tube furnace has the following structure

1. Radiation chamber

The heat load of the main place for Double door well tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Double door well tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Double door well tube furnace

5、Double door well tube furnace application

Double door well tube furnaces have the following purposes.

1. Metal forging heating

The Double door well tube furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Double door well tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Double door well tube furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door well tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Double door well tube furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Double door well tube furnace

6、Double door well tube furnace quotation

The Double door well tube furnace price is introduced as follows:

1. Reasonable cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Double door well tube furnace will also fluctuate to some extent.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. Low cost of raw materials

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

5. Proper management mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Double door well tube furnace

Double door well tube furnaceit has the functions of hardening and tempering, heat treatment, normalizing, quench and anneal，it is mainly composed of ventilation system, furnace chamber, recovery of waste heat, furnace chamber and combustor，Strong adaptability,Easy to maintain,energy saving and environmental protection,energy-efficient,Easy to control。