Introduction to Split type well annealing furnace, introduction to heating furnace advantages and characteristics

Split type well annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Split type well annealing furnace

Split type well annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，Mainly used forMetal forging heating,Metal heat treatment,Improve production efficiency,Metal forging heating andMetal heat treatment，reliable quality。

Split type well annealing furnace

2、Introduction of Split type well annealing furnace characteristics

Split type well annealing furnace has the following characteristics

1. Stable and reliable

The Split type well annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Split type well annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Split type well annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Split type well annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Split type well annealing furnace

3、Split type well annealing furnace function

Split type well annealing furnacemultifunctional, with functions such as Forging heating, Casting heating, heat treatment, quench and temper。

Split type well annealing furnace

4、Split type well annealing furnace advantage

The advantages of Split type well annealing furnace are as follows:

1. easy to operate

The operation interface of the Split type well annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Wide application range

The Split type well annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Efficient combustion

The Split type well annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Intelligent control

The Split type well annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Split type well annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

Split type well annealing furnace

5、Split type well annealing furnace structure composition

The Split type well annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Split type well annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Radiation chamber

The heat load of the main place for Split type well annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Split type well annealing furnace

Split type well annealing furnacethe main features are Easy to control, energy saving and environmental protection, Strong adaptability, Stable and reliable and Strong adaptability，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。