Introduction to Fully automatic well tube furnace, advantages, characteristics and principles of heating furnace

Fully automatic well tube furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It can be used for Metal tempering, Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting and so on，it is widely used in automobile, building materials, material, light industry, Machinery manufacturing and other industries，was developed and designed by One-combustion energy saving。

1、Brief introduction of Fully automatic well tube furnace

Fully automatic well tube furnaceIt is a forging heating device using gas as fuel.，the product looks atmospheric.，it is mainly composed of furnace chamber, Radiation chamber, combustor, convection chamber and ventilation system，Fully automatic well tube furnaceThe structure is novel, special, advanced, reasonable and scientific.。

Fully automatic well tube furnace

2、Advantages of Fully automatic well tube furnace principle

Fully automatic well tube furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Mainly used forMetal tempering,Metal melting and casting,Metal forging heating,Improve production efficiency andMetal heat treatment，is a Fully automatic well tube furnace，The structural design is more advanced and reasonable.，it is mainly composed of ventilation system, convection chamber, furnace chamber, Radiation chamber and combustor，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Fully automatic well tube furnace

3、Fully automatic well tube furnace explanation video

The following is the live video of Fully automatic well tube furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs. of Fully automatic well tube furnace.。

Fully automatic well tube furnace

As you can see from the live video.，One-combustion energy saving It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

4、Structural advantages of Fully automatic well tube furnace

The Fully automatic well tube furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Fully automatic well tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Fully automatic well tube furnace

5、Fully automatic well tube furnace HD picture real shot

One-combustion energy saving Fully automatic well tube furnace HD picture, panoramic shooting。

Fully automatic well tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Fully automatic well tube furnacethe advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a kind of high quality and low price Fully automatic well tube furnace。