What is a Bright Well Annealing Furnace? Forging furnace specifications, models, and parameters

Bright Well Annealing FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it has the functions of normalizing, quench, Forging heating, hardening and tempering and normalizing，The overall structural design is relatively simple and compact.，Structure consists of convection chamber, recovery of waste heat, combustor, ventilation system, furnace chamber and so on，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。The following is to introduce the Bright Well Annealing Furnace:

1、Brief introduction of Bright Well Annealing Furnace

Bright Well Annealing FurnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Bright Well Annealing Furnace

2、Bright Well Annealing Furnace field real shot

Provide high-definition Bright Well Annealing Furnace real shot, a variety of specifications and models for customers to visit.。

Bright Well Annealing Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Bright Well Annealing Furnace performance advantage

The advantages of Bright Well Annealing Furnace are as follows:

1. Efficient combustion

The Bright Well Annealing Furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. easy to operate

The operation interface of the Bright Well Annealing Furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Rapid temperature rise

The Bright Well Annealing Furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Uniform heating

The Bright Well Annealing Furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Bright Well Annealing Furnace can significantly reduce energy consumption, thus reducing operating costs.

Bright Well Annealing Furnace

4、Working principle of Bright Well Annealing Furnace

Bright Well Annealing Furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Bright Well Annealing Furnace

5、Bright Well Annealing Furnace characteristics

The Bright Well Annealing Furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Bright Well Annealing Furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Bright Well Annealing Furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Bright Well Annealing Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Bright Well Annealing Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Bright Well Annealing Furnace

6、Bright Well Annealing Furnace price

The Bright Well Annealing Furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Bright Well Annealing Furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Bright Well Annealing Furnace are different.

2. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

3. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. regional advantages

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Bright Well Annealing Furnace have more or less differences in price.

Bright Well Annealing Furnace

Bright Well Annealing Furnaceusually used in Household necessities, shipping, machinery, pharmacy, electron and other fields，the product looks beautiful.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。