What is a SCR low-temperature catalytic absorption flue gas denitrification system? Introduction to the advantages and characteristics of the SCR denitration

SCR low-temperature catalytic absorption flue gas denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.。

1、Brief introduction of SCR low-temperature catalytic absorption flue gas denitrification system

SCR low-temperature catalytic absorption flue gas denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，it has the functions of Improve working conditions, Improve energy efficiency, environmental protection, Improve energy efficiency and Promote sustainable development，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR low-temperature catalytic absorption flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The SCR low-temperature catalytic absorption flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low-temperature catalytic absorption flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low-temperature catalytic absorption flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low-temperature catalytic absorption flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low-temperature catalytic absorption flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low-temperature catalytic absorption flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，has been favored by more and more customers.。

SCR low-temperature catalytic absorption flue gas denitrification system

2、Working principle of SCR low-temperature catalytic absorption flue gas denitrification system

SCR low-temperature catalytic absorption flue gas denitrification systemat work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，is a SCR low-temperature catalytic absorption flue gas denitrification system，is carefully developed by One-combustion energy saving combined with advanced technology。

SCR low-temperature catalytic absorption flue gas denitrification system

3、SCR low-temperature catalytic absorption flue gas denitrification system real shot picture

High-definition pictures of One-combustion energy saving SCR low-temperature catalytic absorption flue gas denitrification system, showing different specifications and models.。

SCR low-temperature catalytic absorption flue gas denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of SCR low-temperature catalytic absorption flue gas denitrification system characteristics

SCR low-temperature catalytic absorption flue gas denitrification system has the following characteristics

1. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

2. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

3. Mature technology

After years of development and application, SCR low-temperature catalytic absorption flue gas denitrification system technology is very mature and has a wide application prospect.

4. Small secondary pollution

The by-products produced in the SCR low-temperature catalytic absorption flue gas denitrification system opening process are nitrogen and water vapor, and there is no secondary pollution problem.

5. Strong adaptability

SCR low-temperature catalytic absorption flue gas denitrification system technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

SCR low-temperature catalytic absorption flue gas denitrification system

5、Introduction of advantages of SCR low-temperature catalytic absorption flue gas denitrification system

SCR low-temperature catalytic absorption flue gas denitrification systems have the following advantages.

1. Environmental friendliness

The by-products produced by SCR low-temperature catalytic absorption flue gas denitrification system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low-temperature catalytic absorption flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

2. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the SCR low-temperature catalytic absorption flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low-temperature catalytic absorption flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low-temperature catalytic absorption flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Intelligent control and convenience of operation

The SCR low-temperature catalytic absorption flue gas denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the SCR low-temperature catalytic absorption flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. Environmental friendliness

The by-products produced by SCR low-temperature catalytic absorption flue gas denitrification system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low-temperature catalytic absorption flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

SCR low-temperature catalytic absorption flue gas denitrification system

6、How much is the SCR low-temperature catalytic absorption flue gas denitrification system?

The SCR low-temperature catalytic absorption flue gas denitrification system price is introduced as follows:

1. market supply and demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of SCR low-temperature catalytic absorption flue gas denitrification system will fluctuate greatly, and the market changes are various.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. market

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the SCR low-temperature catalytic absorption flue gas denitrification system will be very high.

SCR low-temperature catalytic absorption flue gas denitrification system

SCR low-temperature catalytic absorption flue gas denitrification systemthe product looks atmospheric.，widely used incement plant,building materials,Gas power plant,Gas power plant,metallurgy and other industries。