Introduction to SCR low temperature denitrification equipment and SCR denitration system working principle

SCR low temperature denitrification equipmentthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.。

1、Brief introduction of SCR low temperature denitrification equipment

SCR low temperature denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，is a kind of high quality and low price SCR low temperature denitrification equipment，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low temperature denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low temperature denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR low temperature denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR low temperature denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Technology has been developed and applied for many years, and it is mature and stable. The SCR low temperature denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low temperature denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，multifunctional, with functions such as Improve working conditions, Promote sustainable development, environmental protection, Improve energy efficiency and Improve working conditions，is a SCR low temperature denitrification equipment。

SCR low temperature denitrification equipment

2、SCR low temperature denitrification equipment function

SCR low temperature denitrification equipmentmultifunctional, with functions such as Promote sustainable development, Improve working conditions, environmental protection, Improve energy efficiency and Promote sustainable development，delective catalytic reduction technology is an efficient flue gas denitrification technology.，The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR low temperature denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low temperature denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR low temperature denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low temperature denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low temperature denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low temperature denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，is a kind of high quality and low price SCR low temperature denitrification equipment，the product looks beautiful.。

SCR low temperature denitrification equipment

3、Introduction of advantages of SCR low temperature denitrification equipment

The advantages of SCR low temperature denitrification equipment are as follows:

1. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low temperature denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low temperature denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

2. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the SCR low temperature denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

3. Wide applicability

SCR low temperature denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR low temperature denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

4. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low temperature denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low temperature denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

5. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the SCR low temperature denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low temperature denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

SCR low temperature denitrification equipment

4、SCR low temperature denitrification equipment structure composition

The SCR low temperature denitrification equipment has the following structure

1. control system

The whole SCR low temperature denitrification equipment is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

SCR low temperature denitrification equipment

5、SCR low temperature denitrification equipment introduction video

The following is the live video of SCR low temperature denitrification equipment designed and produced by One-combustion energy saving for users, from which we can see the Technology has been developed and applied for many years, and it is mature and stable. The SCR low temperature denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low temperature denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR low temperature denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR low temperature denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low temperature denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR low temperature denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency. of One-combustion energy savingproduce的SCR low temperature denitrification equipment.。

SCR low temperature denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

6、SCR low temperature denitrification equipment picture

A high-definition picture list of SCR low temperature denitrification equipment is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, Shandong province, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

SCR low temperature denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

SCR low temperature denitrification equipmentin the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it has the structure of Catalyst reactor, Temperature control and monitoring system, control system, Catalyst supply system and Flue gas mixing and distribution system，This SCR low temperature denitrification equipmentSimple structure and advanced technology.。