Introduction to Catalytic flue gas denitrification system and SCR denitration advantages and features

Catalytic flue gas denitrification systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalytic flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Catalytic flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalytic flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalytic flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，The overall structural design is relatively simple and compact.，the main structure includes Catalyst supply system, Flue gas mixing and distribution system, Temperature control and monitoring system, control system, Catalyst reactor and so on，was developed and designed by One-combustion energy saving。The following is to introduce the Catalytic flue gas denitrification system:

1、Brief introduction of Catalytic flue gas denitrification system

Catalytic flue gas denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，widely used in coal-fired power station, iron and steel plant, coal-fired power station, metallurgy, iron and steel plant and other fields，it has been widely used in Gas power plant, cement plant, building materials, coal-fired power station, building materials and other industries，the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalytic flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalytic flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Catalytic flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalytic flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，it has the functions of Promote sustainable development, environmental protection, Improve energy efficiency, Improve working conditions and Promote sustainable development。

Catalytic flue gas denitrification system

2、Catalytic flue gas denitrification system explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Catalytic flue gas denitrification system production process and production site, and gain favorable comments and recognition from customers.。

Catalytic flue gas denitrification system

As you can see from the live video.，One-combustion energy saving the advantage is The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalytic flue gas denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalytic flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalytic flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.。

3、Catalytic flue gas denitrification system function

Catalytic flue gas denitrification systemmultifunctional, with functions such as environmental protection, Improve energy efficiency, Promote sustainable development, Improve working conditions and environmental protection，it is widely used in Gas power plant, iron and steel plant, cement plant, building materials and metallurgy，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，it has the structure of Temperature control and monitoring system, Catalyst reactor, control system, Flue gas mixing and distribution system and Catalyst supply system，Catalytic flue gas denitrification systemThe overall structural design is simple, diverse and beautiful.，super quality and competitive price。

Catalytic flue gas denitrification system

4、Catalytic flue gas denitrification system characteristics

The Catalytic flue gas denitrification system features are as follows:

1. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

2. Stable operation and stability

The Catalytic flue gas denitrification system technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

3. Mature technology

After years of development and application, Catalytic flue gas denitrification system technology is very mature and has a wide application prospect.

4. High denitration efficiency

The denitration efficiency of Catalytic flue gas denitrification system technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

5. Mature technology

After years of development and application, Catalytic flue gas denitrification system technology is very mature and has a wide application prospect.

Catalytic flue gas denitrification system

5、Catalytic flue gas denitrification system application

Catalytic flue gas denitrification systemIt has the functions of environmental protection, Promote sustainable development, Meet the requirements of environmental protection, Improve product quality and Flue gas denitrification，multifunctional, with functions such as Improve energy efficiency, Promote sustainable development, Improve working conditions, environmental protection and Improve energy efficiency，it is widely used inGas power plant,metallurgy,cement plant,iron and steel plant,building materials and other industries，features include Stable operation, Strong adaptability, Environmental protection and pollution-free, Mature and stable technology and Stable operation，The overall structural design is relatively simple and compact.，it is mainly composed of Temperature control and monitoring system, Catalyst reactor, Catalyst supply system, control system and Flue gas mixing and distribution system。

Catalytic flue gas denitrification system

6、How much is the Catalytic flue gas denitrification system?

The Catalytic flue gas denitrification system price is introduced as follows:

1. Model type

There are several specifications and models of Catalytic flue gas denitrification system, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Catalytic flue gas denitrification system, and the budget and other requirements recommend suitable Catalytic flue gas denitrification system for everyone.

2. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Catalytic flue gas denitrification system has a higher cost performance.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Catalytic flue gas denitrification system price and service can meet the actual needs of customers.

4. sales mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Catalytic flue gas denitrification system is low.

5. manufacturing cost

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

Catalytic flue gas denitrification system

Catalytic flue gas denitrification systemusually used in iron and steel plant, Gas power plant, cement plant, metallurgy, coal-fired power station and other fields，is a Catalytic flue gas denitrification system，Widely used in environmental protection, Promote sustainable development, Improve product quality, Meet the requirements of environmental protection and Flue gas denitrification。